> Bt Voyager
> Bt Voyager 190 Connections
Bt Voyager 190 Connections
Hope this helps and thanks for your reply. I have a few of these kicking around. Any help apreciated........ It connects to the pc via a rj45 (network lead) so you will need a network card in the pc most new pcs have them as standard. weblink
An unlocked firmware is available.. Cheers, Squbel PS. Open another web browser window (DO NOT CLOSE previous one) 8. I would be very grateful if you could confirm this workaround.
If thats the case then it isnt a router but a modem with a RJ45 port, and you will need to install the aol crapware to make it work. The Next button will take us to the ADSL information screen. You have choices!
DO NOT CLICK on it! 6. Nice little thing [except she didnt have a LAN card hehe] but just a single page status / update / diag at 192.168.0.1. Then follow this simple procedure (adapted from Dan's comment).. If so, there is an option to, load the orignal drivers, in the AOL One-click fixes.
Or is it ? In short; forget that! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members. check it out The Netbook brand may be … Can't Access Nighthawk Router Login Page 3 replies Hello Daniweb Community, I've been given a **Nighthawk** (R7000) to checkout to see if I can get
It would be very nice to analyse them. Does the isp username have the AOL part hard-coded? Interesting times ahead.. [snipped] ;o) Cor Manaboutathing - 23.01.06 12:06 pm Anyone managed to unlock the BT VOYAGER 2091 router to other ISP's ? Can't really advise about the 190 though.As for a WAN connection, you'd need either a Fibre line or to move to a cable provider to get that rather than DSL, hope
These posts have been archived and can no longer be replied to or modified. Short URL to this thread: https://techguy.org/497733 Log in with Facebook Log in with Twitter Log in with Google Your name or email address: Do you already have an account? At last http://www.uk-bug.net/modules.php?op=modload&name=Sections&file=index&req=viewarticle&artid=10&page=1 I have been unable to try this yet, I someone has time please advise, Thanks Squbel - 08.01.06 12:15 am Tigger : I'm afraid it's not going to It's a guide to unlock totally different ADSL router - EN5861 cor - 08.01.06 6:33 am so it is!
Copyright ©1999-2014 The Scream! http://lebos.org/bt-voyager/bt-voyager-105-drivers.php If you connect it up (without installing any software) and type 192.168.0.1 in Internet Explorer, you get a status page with NO options to set the username and/or password, or any http://192.168.1.1/ and press enter 3. Oct 10, 2008 #4 (You must log in or sign up to reply here.) Show Ignored Content Topic Status: Not open for further replies.
- Especially httpd and ftpd.
- Click here to join today!
- Will also make comment about it here.
- Good night all!
- The red & white audio … Wireless Adapter and Bluetooth Not Working! 10 replies Greetings, I got a Notbook from a friend to fix it, strictly speaking, installing a fresh copy
- Leave LAN side settings and Voice settings at default.
- Still chances are 50-50...cause you are talking about Linux.....
- They are - VPI=0, VCI=38, PPPoA, Authentification= CHAP, Modulation method= Multi-mode, Encapsulation= VCMUX, Primary DNS= 184.108.40.206 Secondry DNS= 220.127.116.11 Maybe these might be useful.
- Log in with Facebook Log in with Twitter Log in with Google Your name or email address: Do you already have an account?
WAN settings are always VPI:0 VCI:38 PPPoATM, VCMUX encapsulation, and most other stuff can be left as default except your new ISP details. My excuse is that I was focused on saying "unplug" because so many people don't know that is what we mean when we say "power cycle." Caren, Network Connections - right Yes, my password is: Forgot your password? check over here Orange tech by email have been friendly even though I mentioned AOL but they couldn't help with getting a non AOL driver.
If I had one, I might figure it out and do a page like this 205 page. That's what I meant by.. For a copy please go herehttp://www.jas0r.com/downloads/BT_Voyager_190_fw.bin Upload it by using the upload built into the routers home page. 0 enriquillo 10 Years Ago No known program will open the file (Binary
Big thanks and full credits go to C1 (lost1e (at) hotmail (dot) com) for the following, extremely cute hack.
I'm still getting disconnected occaisionally. Drag & Drop Pickers! That would provide a simple solution for latter 220v users. There's gotta be a way to get it out.
Still can't find out if BT Voyager 190 will work with Talk Talk and in particulart whether Talk Talk will support PPPoE connection. If anyone can point me in the direction of any firmware removal tools, maybe the OEM manufacturers website then i'll give that a go. The main page started getting a lot of non-205 action, particularly folk looking for ways to unlock the BT Voyager 2091 router to use with another ISP. this content I won't be rushing to upload the results of any early firmware builds since I depend on my 220V for internet access, and I don't have a copy of my current
I might try squbel's idea about the USR 9106, but i may hold out for a couple of days and see if i can find the old firmware. You should have no problems with the first one - I use my 220V and I'm with PlusNet - you do need to enter your correct ISP username and password as Now connect the router to at least one computer via an Ethernet cable. Your 220V has a later firmware version than mine, and your version appears to be the same one as is blocking Voyager 2091 users from use of other ISPs. (BTW, have
Thanks Raj cor - 24.01.06 12:03 pm ItsRich, Manaboutathing, check the advanced page. No, create an account now. The block - whever it is - will probably not be found by looking at the GPL source since I suspect it has been added by BT, and what we've got We'll see.
Click on Obtain an IP address automatically, Enable NAT should be checked. Up for it?