Home > Boot Failure > Booting Problem With Maxtor SATA HD

Booting Problem With Maxtor SATA HD


I eventually have to turn the power off, since I am unable to change anything with the keyboard (ctrl,alt,del does nothing, none of the F buttons do anything, so I hold Click on the "Reply" link to post. As a system boots, the BIOS loads that SPECIFIC sector into memory and jumps to it. I tried the BIOS re-install, and my computer wouldn't let it happen - said something to the effect that program was already installed and operation was prevented. have a peek here

Disconect and reconnect my SATA Drives at both ends (MOBO & HD)7. All PC's work the same, and hard disks that are bootable have this MBR, Master Boot Record, in the same location of memory. And that can happen after a cool night if the battery is on it's way out. Preview post Submit post Cancel post You are reporting the following post: Disk boot failure: What is it and what can I do to resolve it This post has been flagged http://knowledge.seagate.com/articles/en_US/FAQ/006183en

Disk Boot Failure Windows 7

As the system starts, the auto-detect feature may display the drive model number on screen. Do save any data you have eg documents or pictures etc and do not forget to save any emails which are a pain because they are stored in the Documents and Once this is done, you should be able to boot into Windows, and the install is complete.   If you correctly installed the drive and it is not detected in the

  • How-To Geek Articles l l Subscribe l l FOLLOW US TWITTER GOOGLE+ FACEBOOK GET UPDATES BY EMAIL Enter your email below to get exclusive access to our best articles and
  • Not only does the drive fail to appear in MAC OS Disk utility and Windows disk management (regardless of whether I run it internally or via an enclosure), it does not
  • when i press f1 it says no boot device available please kindly help me April 12, 2013 Joe if you can help, I have a dell inspiron 15R with a 320g
  • You should be able to install Windows as if from scratch.  Back to the topWhen the storage drive is no longer detected  If a Serial ATA drive, installed as additional storage
  • It's just that little things like that drive me crazy.
  • Drives can stop working due to an electrical or mechanical problem.
  • I keep getting the same error message as everyone else.
  • The directories 'System Volume Information' and '$Recycle bin' are system created if you have SYSTEM RESTORE and a Trash Bin on for that drive, they appear automatically.
  • The maxtor has been retired.

by R. When I reboot it would work again ...Show All Items I had an accident with my Maxtor hard drive .It was broken. Please see the following articles for instructions:  Instructions in Windows 8/7/Vista Instructions in Windows XP  Please check the motherboard compatibility if the drive is not detected in the Disk Management application.Back Internal Hard Disk Not Detected In Bios XP explorer and device manager show SATA hard drive I installed but it doesn't show up in BIOS.

xoxo Flag Permalink This was helpful (0) Collapse - how do i check BIOS settings ... How To Repair Hard Disk Not Detected Look on the VAIO site for your model and see if they have any BIOS updates available, otherwise, you may need to figure out what motherboard and BIOS is currently installed Any ideas or solutions? https://ubuntuforums.org/showthread.php?t=1607302 Matter of fact, if the Maxtor isn't a boot device, remove it too.

Can you please help me to solve this problem that I could recover some data? Disc Boot Failure Insert System Disk And Press Enter If it is, disable it and give it a test run of 2-3 days under a regular rebooting cycle to see if the error persists. Never had this problem using IDE drives. I went back in to the Boot Device Configuration, and my BIOS is apparently different than most.

How To Repair Hard Disk Not Detected

For simplicity, stick with the Master and Slave setup. http://en.community.dell.com/support-forums/disk-drives/f/3534/t/780265?pi33560=4 i currently am running about 12 hard drives including externals, never had a maxtor last more than warrantied (most under 6 mos.), and have yet to have a problem w/a western Disk Boot Failure Windows 7 Thanks for your patience, my friend. Disk Boot Failure Windows 10 I'd bet on a failing HD and/or a broken Windows installation, most likely the HD.

Get the answer Weird bananaJan 30, 2013, 12:32 AM Thanks for replies! navigate here Of course once those drives sizes were surpassed, a BIOS change was required. On the PC I managed to wipe the partitions and create a new fresh GPT partition map and FAT32 partition. Some facilities may be able to salvage information off your original disk for transfer (although where you are still at a point where your OS boots occasionaly, backing up data important Disk Boot Failure Windows Xp

Thanks July 13, 2012 Dave I don't suppose you have an external enclosure you can try it in. I can even restart from Windows with the Iomega connected, so long as I don't do a complete shut down. Dell says to use cable select option which I finally did after being coached by Maxtor's install instructions to use [master] option on the Primary and [none] on the Secondary… didn't Check This Out Again, where you did not get the error every time, you may need to monitor it's progress to see if the error returns.Second, physically check all cabling.

If there is data on the drive you need, you can try hooking it up to an external case or installing it as a second drive in a working computer and Disk Boot Failure Insert System Disk And Press Enter Windows 7 It might see the second drive that Windows missed. Lesson Learned: keep your machine assembled while running :PThank you, and a new drive would be about $80.00 here.

Is the data on this drive backed up elsewhere, or do you need to try to recover it?

I hope you had backups. Did u try to rebuild your register (ctrl + alt when you start up)? Join our forums is you need more help. Disk Boot Failure Insert System Disk And Press Enter Solution Sorry for the lengthy explanation… I'm complicated!

In the end I had to conclude it had to be the drive that was the problem. Please help. i tried in another PC, had swapped every cable and tried in several OS..but result it same… is there anything with the harddisk logic card or its firmware?? http://lebos.org/boot-failure/booting-up-reloops-same-message.php March 20, 2012 Dave Not sure if this is a Sata drive or an IDE drive….but have you confirmed the jumpers are set properly?

It worked, I got into windows. First one is the BOOT SEQUENCE. Today, this is standard practice and all recent systems are built with this already adopted. Thank you for helping us maintain CNET's great community.

The second, however, from 2000, started making squealing sounds and frequent hollow-sounding quite high-pitched clicks. Obviously, it is going to the Iomega to get instructions.