Home > Blue Screen > Blue Screen Shut Down After Installing HP Scanner 5100C WindowsXP

Blue Screen Shut Down After Installing HP Scanner 5100C WindowsXP

Contents

You receive a "STOP 0x00000073 CONFIG_LIST_FAILED" error message in Windows 2000 or in Windows XP You receive a Stop error message that is similar to the following message: If a startup menu opens, use the arrow keys to select Start Windows Normally, then press the Enter key. Technical information: *** STOP: 0x0000007E (0xAAAAAAAA, 0xBBBBBBBB, 0xCCCCCCCC, 0xDDDDDDDD) SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Aside from the usual assortment of faulty drivers and services that can cause all sorts of problems, this error can also occur if you're using multiple monitors. have a peek at this web-site

On the Command Prompt, type wmic recoveros set AutoReboot = False, then press Enter. HP ENVY 15-1000 Series 15-1055SE ; Brief Info: 9 Apr 2009 ... We have created an error report that you can send to help us improve Microsoft Windows. Olympus Digital Cameras Require Olympus Camedia Utility Software (281090)[Click] - This article describes the Olympus digital camera models that require you to use the Olympus Camedia software. https://forums.techguy.org/threads/blue-screen-shut-down-after-installing-hp-scanner-5100c-windowsxp-on-a-new-dell-8200.77150/

Hp Laptop Blue Screen Error

If Windows is not open and the computer has power, press and hold the power button on the computer until the computer shuts off. ARC paths are used to define the path to the Windows installation on Intel x86-processor-based machines. Restore the system to a restore point using HP Recovery Manager. If disabling or removing drivers resolves the issues, contact the manufacturer about a possible update.

More...>> Submitted by Shannon On 8\27\11 Case: How To Fix STOP 0x0000008E (KERNEL_MODE_EXCEPTION_NOT_HANDLED) Introduction: KB 2916627 - STOP 0x8E - Win7/Server 2008 R2 ... You can cancel the test at any time by pressing the Escape key (Esc). I then right clicked each folder and they dont show anything in them. Hp Laptop Blue Screen Windows 8 The computer no longer restarts automatically when a blue screen error occurs.

In some cases, the computer may be operating in Windows but suddenly crash and stop responding. Unplug the AC adapter from the computer. that when i shutdown and the settings are saved when i restart the computer the C:\windows=system32 folder is already up maximized. If the Quick Test does not find a problem, run the Extensive Test (about 45 minutes).

The change will take effect when you restart Windows. Blue Screen On Laptop Windows 7 Test the hard drive Many computer problems are related to soft failures (or degraded performance) on the hard drive. Update Windows and Microsoft software Sometimes a blue screen error occurs because you do not have the latest updates for Windows. the only install that worked was the one i got for windows 98-2000 (goit it from us hp site) when i installed it hppp.exe was not present in my older computer

  1. The Stop 0x2E message indicates a system memory parity error.
  2. When this issue occurs, your computer may stop responding. (STOP 0x0000007b or STOP 0x0000000a, with Pqv2i.sys driver [V2i Protector 2.0] from Symantec) You may receive a Stop error message
  3. Please tell Microsoft about this problem.
  4. Make sure you have the latest driver for your video card.
  5. The cause is typically failed or defective RAM (including motherboard, Level 2 cache, or video memory), incompatible or mismatched memory hardware, or when a device driver attempts to access an address

Hp Pavilion Blue Screen At Startup

To see what data this error report contains, click here.A Stop 0x00000050 error may occur in Scsiport.sys when you try to add a SCSI device or a PCI storage device to imp source Make sure the selected restore point is the one you want to use, then click Finish. Hp Laptop Blue Screen Error Xp had a driver for the scanner so you could use it; however most of the functionality was missing. Hp Laptop Blue Screen Windows 10 We are sorry for the inconvenience.

STOP 0x0000008E error message on a blue screen and your computer does not enter hibernation or standby after you remove an IEEE 1394 storage device You may experience Check This Out Removing a non-removable battery can void your warranty. Your Serial Bus Protocol 2 Devices Are Not Connected After You Restart Your Computer (811048)[Click] - When you restart your computer, some of your Serial Bus Protocol 2 (SBP-2) devices such You can cancel the test at any time by pressing the Escape key (Esc). Hp Laptop Blue Screen Of Death

The information is also available under Test Logs on the Diagnostics UEFI main menu. When this issue occurs, your computer may stop responding. (STOP 0x0000007b or STOP 0x0000000a, with Pqv2i.sys driver [V2i Protector 2.0] from Symantec)You may receive a Stop error message after you insert The real problem is to find the root cause.Page IndexTips to Help Track the Problem Down0x00000003 UNSYNCHRONIZED_ACCESS0x00000005 INVALID_PROCESS_ATTACH_ATTEMPT0x0000000A IRQL_NOT_LESS_OR_EQUAL 0xA0x0000001E KMODE_EXCEPTION_NOT_HANDLED 0x1E0x00000023 FAT_FILE_SYSTEM & 0x00000024 NTFS_FILE_SYSTEM0x0000002E DATA_BUS_ERROR 0x2E0x0000003F NO_MORE_SYSTEM_PTES 0x3F0x00000044 MULTIPLE_IRP_COMPLETE_REQUESTS0x00000050 http://lebos.org/blue-screen/blue-screen-while-installing-game.php Log in or Sign up Tech Support Guy Home Forums > Operating Systems > Windows XP > Computer problem?

Also, disable any anti-virus software you may have running. Hp Computer Blue Screen Stuck WRQ AtGuard Program Causes Error Message in Windows XP You may receive the following error message on a blue screen on your Windows XP-based computer with the WRQ Open Device Manager (devmgmt.msc), expand the System devices branch, and double-click the entry corresponding to your Processor-to-AGP Controller.

The message is as follows: A PROBLEM HAS OCCURED.

note: Your computer cannot be used during the tests. Technical information: *** STOP: 0x0000007E (0xC0000005, 0xFC5CCAF3, 0xFC90F8C0, 0xFC90F5C0) SYSTEM_THREAD_EXCEPTION_NOT_HANDLED Easy CD Creator 5.0 Does Not Function In Windows XP When you try to use Roxio Easy CD Use the Right Arrow or Left Arrow keys to navigate through the menu selection to locate the Diagnostics. Hp Laptop Blue Screen With Cursor Shutting Down Computer Takes Extra Time When HID Devices Are Connected (826367)[Click] - When you try to shut down a Windows XP-based computer that has Human Interface Devices (HID) peripherals connected,

Parameters The following parameters are displayed on the blue screen. One of three types of problems occurred in kernel-mode: A condition that the kernel is not allowed to have or intercept (also known as a bound trap) Software This will enable you to view any specific error messages when a blue screen error occurs. http://lebos.org/blue-screen/blue-screen-while-installing-cod2.php Disconnect all external connected peripheral devices such as USB storage devices, external displays, and printers.

Figure : Selecting the Hard Drive Extensive Test Click Run once. HP PC Hardware Diagnostics UEFI enables you to test the main components on your computer by selecting quick tests or longer, more complete tests.